Testing AD8302-based interferometer at LRO using Signal Generator
AD8302-based interferometer uses 2 x Nooelec 1.4GHz mesh 60cm x 100cm dishes and 3 x Nooelec SAWBird H1 LNAs on each leg. Tested using Latnex Signal Generator 1.4GHz at +15dB…
AD8302-based interferometer uses 2 x Nooelec 1.4GHz mesh 60cm x 100cm dishes and 3 x Nooelec SAWBird H1 LNAs on each leg. Tested using Latnex Signal Generator 1.4GHz at +15dB…
I used bananas as source of radiation to test detection of radiation by pair of UKRAA Cosmicwatch coincidence detectors – bananas placed on top of detectors. Download my results by…
Jan kindly tested his AD8302 board to see what voltages he gets – and I have similarly tested mine today. Results below. Andy http://astronomy.me.uk/wp-content/uploads/2024/01/Testing-voltages-on-outputs-AD8302-board-interferometer-Jon-Lustrup-vs-Andrew-Thornett-260124.docx
Photo of the 2 muon detectors at LRO – they are made by UKRAA and used in coincidence mode (master/slave configuration). Andy
Data from 21-22/1/2024 @ LRO – 5m distance between 2 x Nooelec 1.4GHz 60x100cm mesh aerials
Interferometers need hardware bias tees for SAWBird H+ 1420MHz filters with cascaded amplifiers, (which they also need as AD8302 chip requires certain level power input on SMA connectors to work)…
Correspondence with Jan Lustrup: Hi Andy…. You want to test changes of phase between the ports, not frequency! Use the same frequency generator to a 2 way power splitter. One…
Click below to view a schematic of Ted Cline’s Additive Interferometer. Andy http://astronomy.me.uk/wp-content/uploads/2024/01/Schematic-of-Ted-Clines-Additive-Interferometer-Nov-2023.pdf
Demonstrating the apparatus works, which I am glad to hear! The RMOB upload below (LRO data) shows clear increasing meteor detection count from Graves 143.050MHz USB over last 24 hours…