GNU Radio error “missing xterm” when installed under Windows 11
Admin
Great 👍 let’s pin down what’s pulling in xterm. On Windows GNU Radio Companion (GRC), that usually comes from a block that has its “Command” field hard-coded to xterm -e…
Comparing signal attenuation at 1420 MHz in short 30cm jumper coaxial cables RG174 vs RG316
For a 30 cm jumper at 1420 MHz (H I line), RG174 and RG316 are effectively neck-and-neck—both cost you ~⅓–½ dB pre-LNA. Quick comparison (30 cm @ ~1.5 GHz) That…
GNU Radio Error Message “unable to scan ip19”
That error message — “unable to scan ip19” — isn’t a standard GNU Radio error on its own. It usually comes from an underlying hardware driver or device source block…
GNU Radio Error Message “unable to scan ip19”
That error message — “unable to scan ip19” — isn’t a standard GNU Radio error on its own. It usually comes from an underlying hardware driver or device source block…
GNURadio Cookbook – RTL-SDR Radio Setup With GNURadio Companion
Thursday, August 8, 2024 This is a very useful website (not edited by myself) – link below: RTL-SDR Radio Setup With GNURadio Companion: GNURadio Cookbook – A collection of recipies…
GNU Radio standard ways to save raw or processed data streams from an SDR
In GNU Radio you’ve got a few standard ways to save raw or processed data streams from an SDR (like your RTL-SDR or RSPduo) directly from a flowgraph or a…
RTL-SDR Blog V4, which uses the RTL2832U ADC and R828D tuner, has the following sampling rate characteristics according to its datasheet
The RTL-SDR Blog V4, which uses the RTL2832U ADC and R828D tuner, has the following sampling rate characteristics according to its datasheet: In practice, most users find that setting a…