Alex Pettit Plate Yagi vs Ptarmigan Array for mapping Milky Way at LRO
I have set up the new aerial from Alex Pettit at SARA next to my existing Ptarmigan ex-military dipole array, to see which is able to get better hydrogen signal…
I have set up the new aerial from Alex Pettit at SARA next to my existing Ptarmigan ex-military dipole array, to see which is able to get better hydrogen signal…
Loosely assembled – I’ve asked Alex some questions before I complete assembly. Andy Hi Alex Before I get the old soldering iron out can I check couple things with you:…
Use following URL: https://www.astronomy.me.uk/Large_media_uploads/
ZIP folders for both essential pieces of software for mapping Milky Way. https://www.astronomy.me.uk/Large_media_uploads/ScopeBoxorigdownload.zip https://www.astronomy.me.uk/Large_media_uploads/ezRA.zip
Processing and plotting with ezRA suite software (Ted Cline)
Calculating expected fringe period of interferometric solar traces, if detected (c/o Mike Otte, SARA): Fringe rate = Baseline / wavelength *angular rotation of earth * cos declination ex: Fringe period…
Apparently, significant dips – but what I don’t understand is that they appear to occur roughly same time each day! Andy 1/8/2024: B2/8/2024: 11/8/2024: 12/8/2024: 13/8/2024::
Latest attempt to record interference spikes using radio interferometer. This time, I used Mike’s AD8302-based receiver, with computer now removed 50cm outside box away from receiver and also 6 point…
My version of instructions on how to do this – incorporates Christian Buil’s guidance and my own screenshots. PDF Version: http://astronomy.me.uk/wp-content/uploads/2024/07/Calibrating-wavelength-in-VSPEC-Visual-Spec-Software-280724.pdf Word Version: http://astronomy.me.uk/wp-content/uploads/2024/07/Calibrating-wavelength-in-VSPEC-Visual-Spec-Software-280724.docx
3D-printed Bahnitov mask designed for 30mm guide scopes – purchased from ebay for £6.