SID from 31/3/2026 – comparing LRO data with Lionel Loudet’s SID Monitoring Station results
SID Monitoring Station below: LRO below:
SID Monitoring Station below: LRO below:
Click on following links to download files: https://www.astronomy.me.uk/wp-content/uploads/2026/03/UKRAA_Github_Software__PicoMuon-main-acc_300326.zip https://www.astronomy.me.uk/wp-content/uploads/2026/03/How-to-set-up-software-UKRAA-PicoMuon-Detector-from-Github-300326.docx https://www.astronomy.me.uk/wp-content/uploads/2026/03/UKRAA-PicoMuon_detector_Manual_ISSUE_1.1-acc_300326.pdf https://www.astronomy.me.uk/wp-content/uploads/2026/03/UKRAA_Setting_the_PicoMuon_DS3231_rtc_instruction_V1-acc_300326.pdf Information from Github page https://github.com/UKradioastro/UKRAA_PicoMuon 30/3/2026: Name N15TelescopeRemove reference to update code from READMEd6fa0ff · last month WWW moved…
Check GetDataRawACM0 service is running sudo systemctl status PicoMuonACM0.service sudo systemctl start PicoMuonACM0.service sudo systemctl stop PicoMuonACM0.service sudo systemctl enable PicoMuonACM0.service sudo systemctl disable PicoMuonACM0.service . Screenshot below is the…
Hi Andrew I have attached two files (accessible via link at bottom of this post), which need to be copied onto the RPi. I have changed their names because a…
At 20 kHz you’re really designing a resonant system, not just adding a tuner box. For your kind of radio astronomy / interferometry work, the most practical approach is a…
From Brian Coleman: Hello Andrew, Looking at your photo the feed looks much too close to the dish. You need to calculate the focus point of the dish. The phase…
Yes—central obstruction from your feed does matter for a hydrogen line (1420 MHz) dish, but how much it matters depends on your goals and geometry. What central obstruction does When…
In principle yes, but in practice it’s very unlikely—and that’s why nearly all known astrophysical masers come from small, simple molecules. Why small molecules dominate masers Most astronomical masers involve…
For CosmicWatch in hardware coincidence mode, the criterion is actually very simple and quite tight: Hardware coincidence (detector-to-detector cable) 👉 So the effective “limit” is: Two pulses must occur within…