A8302 Amplitude comparator board
Costing around £6 only on Amazon, I am hoping I can use this amazing little board based on A8302 chip in an interferometer. Ted Cline has successfully obtained interferometry fringes…
Costing around £6 only on Amazon, I am hoping I can use this amazing little board based on A8302 chip in an interferometer. Ted Cline has successfully obtained interferometry fringes…
This new mesh antenna from Nooelec is a variation on their 17.6GHz mesh antenna – except it is a little bit bigger, stalk a bit longer, waveguide significantly bigger, and…
I am corrected the elevations and azimuths in my data, now that I am using a compass and inclinometer on my phone to get accurate readings and completed data collection…
3 different altitudes so far, all at 163 degrees azimuth (I used compass to day to check my “180 degrees azimuth” and it is actually 163 degrees) from Midlands, UK…
I recently received one of these from Amazon – at first sight it looked like it was the same as the same company’s 1.7GHz GOES mesh dish, but with larger…
Terrible humidity problem – I had mounted receiver on piece of wooden board and fungus growing on it and each morning the box is dripping inside! So, today, I have…
Collected using Ptarmigan array Processed using ezRA suite Plots below – data so far covers 2 data points – both azimuth 180, elevation 90 degrees (pointed towards Zenith) and elevation…
Whole array = 86 x 86cm in size 4 x 4 pattern of dipole aerials Each dipole = 97mm in length
I have now installed the 86 x 86cm military array on my new wooden mount and pointed it south Andy
The following link will download the SDRSharp IFAverage data set from last 24 hours – resulting from retuning the SDR to 1420.405MHz – not quite sure why plots from ezRA…