Processing additive interferometer data 21-220124 gain 50 using ezRA
Data from 21-22/1/2024 @ LRO – 5m distance between 2 x Nooelec 1.4GHz 60x100cm mesh aerials
Data from 21-22/1/2024 @ LRO – 5m distance between 2 x Nooelec 1.4GHz 60x100cm mesh aerials
There is no excerpt because this is a protected post.
Interferometers need hardware bias tees for SAWBird H+ 1420MHz filters with cascaded amplifiers, (which they also need as AD8302 chip requires certain level power input on SMA connectors to work)…
Correspondence with Jan Lustrup: Hi Andy…. You want to test changes of phase between the ports, not frequency! Use the same frequency generator to a 2 way power splitter. One…
Click below to view a schematic of Ted Cline’s Additive Interferometer. Andy http://astronomy.me.uk/wp-content/uploads/2024/01/Schematic-of-Ted-Clines-Additive-Interferometer-Nov-2023.pdf
I particularly enjoy photographing the Sun. For this I use following: ZWO 174MM camera. Sky Watcher Equinox 100mm OTA. HEQ5 Pro Mount. Hinode Solar Guider. Daystar Quark Filters = usually…
Demonstrating the apparatus works, which I am glad to hear! The RMOB upload below (LRO data) shows clear increasing meteor detection count from Graves 143.050MHz USB over last 24 hours…