GNU Radio Error Message “unable to scan ip19”
Admin
That error message — “unable to scan ip19” — isn’t a standard GNU Radio error on its own. It usually comes from an underlying hardware driver or device source block…
2025
GNU Radio Error Message “unable to scan ip19”
That error message — “unable to scan ip19” — isn’t a standard GNU Radio error on its own. It usually comes from an underlying hardware driver or device source block…
GNURadio Cookbook – RTL-SDR Radio Setup With GNURadio Companion
Thursday, August 8, 2024 This is a very useful website (not edited by myself) – link below: RTL-SDR Radio Setup With GNURadio Companion: GNURadio Cookbook – A collection of recipies…
GNU Radio standard ways to save raw or processed data streams from an SDR
In GNU Radio you’ve got a few standard ways to save raw or processed data streams from an SDR (like your RTL-SDR or RSPduo) directly from a flowgraph or a…
RTL-SDR Blog V4, which uses the RTL2832U ADC and R828D tuner, has the following sampling rate characteristics according to its datasheet
The RTL-SDR Blog V4, which uses the RTL2832U ADC and R828D tuner, has the following sampling rate characteristics according to its datasheet: In practice, most users find that setting a…
GNU Tutorials
https://wiki.gnuradio.org/index.php/Tutorials
LNA vs LNB
They sound similar, but they serve different purposes in the signal chain: LNA (Low-Noise Amplifier) LNB (Low-Noise Block Downconverter) ✅ In short: