Skip to content
- Muon detectors x2, one on top of other, linked by 3.5mm audio cable, and USB cable plugged into BOTTOM detector and going to MiniPC rear USB port – tested and works with USB to left of VGA monitor port looking from back of MiniPC.
- Turn on MiniPC. It must be connected to home network ideally via LAN cable. The dashboard will run as long as machine remains turned on.
- (Service to collect muon data has been set up by Rhys to automatically start, so does not need to be separately started by user.)
- On Linux MiniPC, dashboard can now be edited by opening browser and navigating to http://127.0.0.1:3000/
- (Note in above it is http:// and NOT https://)
